With everything plugged in and the ignition off, measure the resistance of the following solenoid wires.
Pins 7 (white) and 1 (light blue) should be >13 Ohms.
Pins 7 (white) and 11 (yellow) should be >22 Ohms.
Pins 7 (white) and 10 (tan) should be >22 Ohms.
Pins 7 (white) and 2 (pink) should be >200 Ohms.
Pins 7 (white) and 4 (dark blue) should be >200 Ohms.
Pins 7 (white) and 5 (gray) should be >200 Ohms.
Pins 7 (white) and 3 (black) should be >200 Ohms.
Next, check the resistance between pin 7 (white) and body ground.
The resistance should be > 200 Ohms.
Did any of these tests fail?